Conveyor Belt Applications by Industry
Each industry loads a conveyor belt differently: sharp ore, hot clinker, combustible coal dust, foundry sand or chemically treated fertilizer. The right belt depends on the material, the conveyor and the conditions where it runs.
Hongkun manufactures rubber conveyor belts at its own factory in Qingdao, China. Choose your industry below to see the belts we supply for each plant section, the information we need for a quotation and how we handle replacement orders.
Your application is not listed? Send your material and conveyor details and we will review them.
Conveyor Belts by Industry
Each page covers the plant sections in that industry, the belt types we supply for them and what to send for a quotation.
Mining Conveyor Belt
Ore handling, underground and open-pit conveyors, long-distance routes and steep inclines.
View mining belts →
Quarry Conveyor Belt
Crushing, screening and stockpile conveyors for aggregate, sand and gravel plants.
View quarry belts →
Coal Conveyor Belt
Coal mines, coal handling and thermal power plants, including sites with fire-performance requirements.
View coal belts →
Iron Ore Conveyor Belt
Ore yards, sinter and pellets, coke handling and high-tension blast furnace feed routes.
View iron ore and steel belts →
Foundry Conveyor Belt
Sand handling, shakeout and hot castings, plus shot blasting belts and rubber parts in one quote.
View foundry belts →
Cement Conveyor Belt
Limestone, raw meal, clinker and bucket elevator belts, from the quarry to finished cement.
View cement belts →
Fertilizer Conveyor Belt
NPK, urea, potash and phosphate plants, with wear, oil, chemical and heat duties.
View fertilizer belts →
Grain Conveyor Belt
Grain intake, bucket elevators, silo filling and reclaim, rice mills and feed mills.
View grain belts →Choose a Belt by Operating Condition
Within one plant, different sections can need different belts. Start with the condition the belt faces, then check the product page. Reinforcement (EP, NN or steel cord) and cover properties are specified separately, and one belt may need more than one property.
On small screens, swipe the table sideways.
| Operating condition | Typical duties | Product page |
|---|---|---|
| Abrasion, cutting and impact | Ore, crushed rock, sand and gravel at loading and transfer points, and foundry sand. | Abrasion resistant conveyor belts |
| Hot materials | Clinker, sinter, pellets, coke, foundry shakeout and hot castings, subject to confirmed temperatures. | Heat resistant conveyor belts |
| Specified fire performance | Coal handling, underground, grain-dust areas and other sites with flame-performance or antistatic requirements. | Fire resistant conveyor belts |
| Oil contact | Oilseeds, rice bran and other materials treated with or carrying oils. | Oil resistant conveyor belts |
| Chemical exposure | Fertilizers and other chemically active materials. | Chemical resistant conveyor belts |
| Low ambient temperature | Outdoor conveyors in cold climates. | Cold resistant conveyor belts |
| High tension and long distance | Overland routes, large lifts and main feed belts. | Steel cord conveyor belts |
| General plant transfer | Most in-plant conveyors, selected for tension, pulley size and loading. | EP conveyor belts · NN conveyor belts |
| Inclines and slipping loads | Grain, bags and loose material that roll back on a moderate incline. | Patterned conveyor belts |
| Steep inclines | Routes too steep for a flat belt to hold the material. | Corrugated sidewall conveyor belts |
| Vertical elevation | Belt-type bucket elevators for grain, powders and granules. | Bucket elevator belts |
| Enclosed routes | Existing pipe conveyors for dusty or spill-prone materials. | Pipe conveyor belts |
| Casting cleaning | Tumble-type shot blasting machines in foundries and parts plants. | Shot blasting machine belts |
For an early comparison across several options, try the Hongkun Conveyor Belt Selector. Final selection requires review of your operating conditions and conveyor specifications.
Your Application Not Listed?
We also supply belts for other bulk-handling duties. Send the material, its temperature and lump size, the conveyor layout and your current belt specification, and we will review the requirements for a quotation.
Hongkun manufactures the belt itself. If you also need matching conveyor components, such as idlers, belt cleaners or splicing materials, we can source them from suppliers in China and ship them with your belt order. List the items with your inquiry and we will quote them separately.
Conveyor Belt Applications FAQ
Can one belt type cover every section of my plant?
Usually not. Sections in the same plant can carry different materials at different temperatures, tensions and loading conditions. Tell us which sections you are buying for so we can review each duty.
Can you supply replacement belts for existing conveyors?
Yes. Send the old belt specification, dimensions, drawings or clear photos. We review the width, reinforcement, cover thicknesses and splice requirements before confirming production.
Can you also supply idlers and belt cleaners?
Yes. Hongkun manufactures the belt itself, and we can source matching components such as idlers, belt cleaners or splicing materials from suppliers in China and ship them with your belt order. List the items with your inquiry and we will quote them separately.
What information do you need for a quotation?
Start with the material, belt width and length, quantity and delivery destination. Add the existing belt specification, operating temperatures and any fire or electrical requirements. If some details are missing, send what you have and we will tell you what else is needed.
