Corrugated Sidewall Conveyor Belt Specifications and Dimensions
Hongkun’s factory range includes base-belt widths from 300 to 1400 mm, N/S/ES sidewall profiles, and TC/T/TS/C/TCS cleat profiles. Use the tables below to review available dimensions before project-specific selection.
These are production-range references, not an automatic configuration for every conveyor. Final dimensions must match the material, capacity, incline, pulley layout, belt speed, and approved drawing.
What Do B, H, H1, B1, B2 and B3 Mean?
Profile Types and Available Heights
Compare the profile shapes below. Catalog heights are also listed as selectable text for quick reference.
Sidewall Heights (mm)
N Sidewall
40 · 60 · 80 · 100 · 120 mm
S Sidewall
120 · 160 · 200 · 240 mm
ES Sidewall
300 · 400 · 500 · 630 mm
Cleat Heights (mm)
Heights above summarize the catalog’s profile chart. The assembly table below separately lists TC cleats at 260 and 360 mm, which are absent from that chart. Both tables retain their source values; confirm the required profile and height on the order drawing.
Base Belt, Sidewall, Cleat and Carrying-Width Combinations
Swipe horizontally on mobile to view the complete table →| Base belt B | Sidewall H | Cleat H1 | Sidewall base B1 | Effective width B2 | Free edge B3 | Cleat profile |
|---|---|---|---|---|---|---|
| 300 | 40 | 35 | 25 | 180 | 35 | TC |
| 300 | 60 | 55 | 50 | 120 | 40 | TC |
| 300 | 80 | 75 | 50 | 120 | 40 | TC |
| 400 | 60 | 55 | 50 | 180 | 60 | TC |
| 400 | 80 | 75 | 50 | 180 | 60 | TC |
| 400 | 100 | 90 | 50 | 180 | 60 | TC |
| 500 | 80 | 75 | 50 | 250 | 75 | TC |
| 500 | 100 | 90 | 50 | 250 | 75 | TC |
| 500 | 120 | 110 | 50 | 250 | 75 | TC |
| 650 | 100 | 90 | 50 | 350 | 100 | TC |
| 650 | 120 | 110 | 50 | 350 | 100 | TC |
| 650 | 160 | 140 | 75 | 300 | 100 | TC |
| 800 | 120 | 110 | 50 | 460 | 120 | TC |
| 800 | 160 | 140 | 75 | 410 | 120 | TC |
| 800 | 200 | 180 | 75 | 410 | 120 | TC |
| 1000 | 160 | 140 | 75 | 550 | 150 | TC |
| 1000 | 200 | 180 | 75 | 550 | 150 | TC |
| 1000 | 240 | 220 | 75 | 550 | 150 | TC |
| 1200 | 160 | 140 | 75 | 690 | 180 | TC |
| 1200 | 200 | 180 | 75 | 690 | 180 | TC |
| 1200 | 240 | 220 | 75 | 690 | 180 | TC |
| 1200 | 300 | 260 | 100 | 640 | 180 | TC |
| 1400 | 200 | 180 | 75 | 830 | 210 | TC |
| 1400 | 240 | 220 | 75 | 830 | 210 | TC |
| 1400 | 300 | 260 | 100 | 780 | 210 | TC |
| 1400 | 400 | 360 | 100 | 780 | 210 | TC |
Source: Hongkun factory catalog. Final production dimensions require drawing approval.
How to Use the Specification Table
Find the nearest reference
Start with the base-belt width and required sidewall height.
Check usable width
Confirm B1, B2 and B3 against the loading zone and conveyor drawing.
Approve the final design
Review the profile, pitch, reinforcement, joint and pulley requirements before production.
From Reference Dimensions to Your Belt Specification
Use these guides to prepare quotation details, review belt selection, and assess a manufacturer.
What Dimensions Should You Send?
Prepare belt width, sidewall height, cleat type, pitch, and free edge width for your quotation.
View the Quotation Dimensions Guide → Belt SelectionWhich Configuration Fits Your Conveyor?
Review sidewalls, cleats, pulley conditions, and replacement requirements before choosing a configuration.
Read the Sidewall Belt Selection Guide → Supplier ReviewHow Should You Assess a Manufacturer?
Compare customization, technical review, drawing control, production communication, and support.
View the Manufacturer Selection Guide →Send Your Conveyor Drawing and Required Capacity
Hongkun can review the base belt, sidewall, cleat, effective carrying width, reinforcement and rubber compound as one system.
